EN10149 S355NC steel plate/sheet,EN10149 S355NC steel plate/sheet, under EN standard, we can regard S355NC steel plate/sheet as high strength steels for cold-forming, normalised steel.
EN10149 S355NC is mainly used as high strength steels for cold-forming,normalised steels.The EN10149 S355NC steel grade offers excellent bending,flanging cold
bordering and folding properties in both longitudinal and transverse direction.The bending radiispecified below should be observed as minimum values.
| S355NC EN 10149-3 Number:1.0977 |
Comparision of steel grades | |
| DIN | QStE360N | |
| EN | Fe E 355-TD | |
| BS 4360 | - | |
| ASTM | - | |
EN S355NC steel Chemical Composition
| Grade | C max |
Si max |
Mn max |
P max |
S max |
AL max |
Nb max |
V max |
Ti max |
| S355NC | 0.18 | 0.50 | 1.6 | 0.025 | 0.015 | 0.015 | 0.09 | 0.1 | 0.15 |
EN S355NC steel Mechnical Properties
| Nominal thickness(mm) | - |
| ReH-Minimun yield strength(Mpa) | 355 |
| Nominal thickness(mm) | - |
| Rm-Tensile strength(Mpa) | 470-610 |
| Nominal thickness(mm) | From3 |
| A-Minimum elongation Lo=5,65√So(%) | 25 |
| Nominal thickness(mm) | to3 |
| A-Minimum elongation Lo=Lo=80mm(%) | 20 |
The user of S355NC grade must make sure that his calculation, design and processing methods are appropriate for the material. The forming process used must be suitable for the intended application and comply with the state-ofthe- art; it is of fundamental importance to the processing behaviour of this steel grade.
S355NC steel offers excellent bending, flanging, cold-bordering and folding properties in both longitudinal and transverse direction. The bending radii specified below should be observed as minimum values.
we also can supply S260NC,S315NC,S420N,S420NL,please contact us if you need.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
