SAE J 403-AISI 1038/1040 steel plate high carbon steel
1038 / 1040 steel plate, SAE J 403-AISI 1038 / 1040 steel plate, under SAE J 403-AISI standard, we can regard 1038 / 1040 steel plate as high carbon steel.
1038/1040 steel plate is one mainly of high carbon steel, SAE J 403-AISI 1038 / 1040 steel plate is meduim Carbon Steels are similar to low carbon steel except that the carbon ranges from 0.30 to 0.60%&the manganese from 0.50 to 1.65%. Increasing the carbon content is approximately 0.5% with an accompanying increase in manganese allows medium carbon steels to be used in the quenched&tempered conditions. This steels are of particular importance because of unique combination of strength&toughness after heat treat treatment.
| 1038 / 1040 SAE J 403-AISI Number: 1.0511 | Comparison of steel grades | |
| JUS | Č.14341 | |
| DIN | C40 | |
| BS | 080M40, EN8 | |
| GOST | 40 | |
| AISI | 1040 | |
| UNI | C40, | |
| NF | (AF60C40), (1C40) | |
1038/1040 steel Chemical analysis
| Chemical elements | C | Si max. | Mn | P max. | S max. | Cr max. | Mo max. | Ni max. | Cr+Mo+Ni max. |
| %, by mass | 0,37-0,44 | 0,40 | 0,50-0,80 | 0,045 | 0,045 | 0,40 | 0,10 | 0,40 | 0,63 |
| Permissible deviation | ± 0,02 | + 0,03 | ± 0,04 | + 0,005 | + 0,005 | + 0,05 | + 0,03 | + 0,05 |
At the option of the manufacturer the elements aluminium, titanium, vanadium and niobium may be added singly or in combination for grain size control purposes. Elements not quoted in table shall not be added to the steel without the agreement of the purchaser, except for the purpose of finishing the heat. Mechanical properties in the normalized conditions
1038/1040 steel Mechanical properties
| Thickness of ruling section tR | |||||
| Diameter in mm | tR≤ 100mm | 100 < tR≤250mm | 250 < tR≤500mm | 500 < tR≤1000mm | |
| Remin (N/mm2) | 290 | 260 | - | - | |
| Rmmin (N/mm2) | 550 | 530 | - | - | |
| A % min. | l-longitudinal | 17 | 17 | - | - |
| tr -transverse | - | - | - | - | |
| KV min * (J) | l-longitudinal | - | - | - | - |
| tr -transverse | - | - | - | - | |
1N/mm2=1MPa Heat treatment conditions
| Quenching Temperature,0C | Cooling medium | Tempering Temperature,0C | Normalizing temperature,0C |
| 830 to 870 | Water or oil | 550 to 660 | 850 to 890 |
we are 1038/1040 steel suppliers ,also can supply 1035 steel,1042/1045 steel,1049/1050 steel,1055 steel,1060 steel,please contact us if you need
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
