EN10111DD13 steel plate/sheet,EN10111 DD13 steel plate/sheet, under EN standard, we can regard DD13 steel plate/sheet as stamping and cold forming steels.EN10111 DD13 is mainly used as stamping and cold forming steels.
EN10111 DD13 steel is stamping and cold forming steels,which is equivalent to UNI:FeP13, BS:HR1, NFA:3C, JIS:SPHE AK, ASTM:A621DQ and UNE:AP13 steels.
| DD13 EN 10111 Number: 1.0335 |
Comparison of steel grades | |
| UNI5867 | FEP13 | |
| BS1449 | HR1 | |
| NFA 36-301 | 3C | |
| JIS G 3131 | SPHE AK | |
| ASTM-SAE | A621DQ-SAE1006AK | |
| UNE36.093 | AP13 | |
| Chemical elements | C | Si max |
Mn max |
P max. |
S max. |
| DD13 | 0.08 | -- | 0.40 | 0.030 | 0.030 |
DD13 steel Mechanical properties
| thickness | Yield Strength ReH [N/mm2] transv.min. |
Tensile Strength Rm [N/mm2] transv. | Fracture Elongation[%]transv. min. | Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
| t≤ 16mm t >16mm |
170-310 | 0 S | ||
|
t < 3mm |
400 | |||
|
Up to 1.5mm |
28 A80 29 A80 33 A5 |
DD13 Low carbon steel sheets (deep-drawing) are suitable for deep-drawing and cold forming. The sheets are weldable; higher grades are suitable for surface treatment by hot dipping, enameling or other coating methods. Under EN standard, we can regard DD13 steel plate/sheet as stamping and cold forming steels.EN10111 DD13 is mainly used as stamping and cold forming steels. EN10111 DD13 steel plate/sheet is stamping and cold forming steels,which is equivalent to UNI:FeP13, BS:HR1, NFA:3C, JIS:SPHE AK, ASTM:A621DQ and UNE:AP13 steels.
we also can supply DD11,DD12,DD14,please contact us if you need.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
