ASTM A572Gr.65 steel plate/sheet for Fine-grain structural steels, thermomechanically rolled steels
A572Gr.65 steel plate/sheet,ASTM A572Gr.65 steel plate/sheet, under ASTM standard, we can regard A572Gr.65 steel plate/sheet for Fine-grain structural steels, thermomechanically rolled steel.ASTM A572Gr.65 is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -20 degree.
| A572Gr.65 ASTM Number:1.8827 |
Comparison of steel grades | |
| SEW 083 | StE 460 TM | |
| NFA 36-201 | E 460 R | |
| UNI 7382 | Fe E 460 KGTM | |
| BS 4360 | - | |
| EN10113-3 | S460M | |
A572Gr.65 steel Chemical Composition
Grade |
C max |
Si max |
Mn max |
P max |
S max |
N max |
AL max |
Nb max |
V max |
Ti max |
Cr max |
Ni max |
Mo max |
Cu max |
CEV max |
| A572Gr.65 | 0.16% | 0.60% | 1.70% | 0.03% | 0.025% | 0.025% | 0.02% | 0.05% | 0.12% | 0.05% | 0.30% | 0.80% | 0.20% | 0.55% | 0.48% |
A572Gr.65 steel Mechnical Properties
| Temperature | -10 | 0 | 20 |
| Notch impact test. Min. absorbed energy | 43 | 47 | 55 |
| Nominal thickness(mm) | to 16 | 16-40 | 40-63 | 63-80 | 80-100 | 100-120 |
| ReH-Minimun yield strength(Mpa) | 460 | 440 | 430 | 410 | 400 | 385 |
| Nominal thickness(mm) | to 40 | 40-63 | 63-80 | 80-100 | 100-120 |
| Rm-Tensile strength(Mpa) | 540-720 | 530-710 | 510-690 | 500-680 | 490-660 |
| Nominal thickness(mm) | - | ||||
| A-Minimum elongation Lo=5,65√So(%) |
17 | ||||
we are A572Gr.65 steel suppliers ,also can supply A572 Gr42,A572 Gr50,A572 Gr60,A572 Gr.C,please contact us if you need.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
