ASTM - SAE A622 DQ - SAE 1006 AK steel plate/sheet for stamping and cold forming steels
A 622 DQ - SAE 1006 AK steel plate/sheet, under ASTM - SAE standard, we can regard A 622 DQ - SAE 1006 AK steel plate/sheet as stamping and cold forming steels.
SAE A 622 DQ 1006 AK steel is mainly used as stamping and cold forming steels. ASTM - SAE A 622 DQ - SAE 1006 AK steel plate/sheet is stamping and cold forming steels,which is equivalent to UNI:FeP13, BS:HR1, NFA:3C, JIS:SPHE AK,EN10111 DD13 and UNE:AP13 steels.
| A622DQ-SAE1006AK ASTM-SAE Number: 1.0335 | Comparison of steel grades | |
| UNI5867 | FEP13 | |
| BS1449 | HR1 | |
| NFA 36-301 | 3C | |
| JIS G 3131 | SPHE AK | |
| EN 10111 | DD13 | |
| UNE36.093 | AP13 | |
A 622 DQ steel Chemical analysis
| Chemical elements | C | Si max | Mn max | P max. | S max. |
| A622DQ-SAE1006AK | 0.08 | -- | 0.40 | 0.030 | 0.030 |
A 622 DQ steel Mechanical properties
| thickness | Yield Strength ReH [N/mm2] transv.min. | Tensile Strength Rm [N/mm2] transv. | Fracture Elongation[%]transv. min. | Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
| t≤ 16mm t >16mm | 170-310 | 0 S | ||
| t< 3mm t ≥ 3mm | 400 | |||
| Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm | 28 A80 29 A80 33 A5 |
A622 steel covers hot-rolled carbon steel sheet and strip of drawing quality, special killed, in coils or cut lengths. A622 steel is intended for use in fabricating identified parts where particularly severe drawing or forming may be involved and surface appearance is usually not of primary importance.
we are A 622 DQ , 1006 AK steel suppliers, also can supply A621 CQ 1010 ,A 516 Gr 60,please contact us if you need
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
