EN10028-3 P275NL1 boiler steel flat products are made of steels for pressure purposes. It is a weldable fine grain steels in normalized condition. P275NL1 steel equivalents include DIN 17102 TStE 255 and TStE 285, NF A36205 A42 FP, NF A36205 A48 FP.
The main difference between the NL1 and the NL2 grades is the the reduced % of P and S no metallic inclusions allowed in the steel for lower temperature. This is one of the reasons why P275NL1 from BEBON Steel is so good. Because the whole of the steel making at China is set up to produce extremely low P and S steel – clean steel – our P275NL1 boiler steel flat often perform significantly better than required by the relevant standard.
Chemical Composition (%) of P275NL1 Boiler Steel Flats
C |
Si |
Mn |
P |
S |
Al(min) |
N |
0.16 |
0.40 |
0.5-1.40 |
0.030 |
0.020 |
- |
0.02 |
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
0.30 |
0.30 |
0.08 |
0.005 |
0.50 |
0.03 |
0.05 |
Chemical Composition (%) of P275NL1 Boiler Steel Flats
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Impact Energy(KV J) min |
mm |
Min Mpa |
Mpa |
Min % |
-20° |
0° |
+20° |
≤ 16 |
275 |
390-510 |
24 |
47 |
55 |
63 |
16> to ≤35 |
275 |
390-510 |
24 |
47 |
55 |
63 |
35> to ≤50 |
265 |
390-510 |
24 |
47 |
55 |
63 |
50> to ≤70 |
255 |
390-510 |
24 |
47 |
55 |
63 |
70> to ≤100 |
235 |
370-490 |
23 |
47 |
55 |
63 |
100> to ≤150 |
235 |
350-470 |
23 |
47 |
55 |
63 |
P275NL1 boiler steel plates and flats are excellent and meets the requirements of many major industrial specifiers on an ex-stock basis. For exceptionally stringent requirements it is possible to order directly from the mill.
Are you also interested in further steel processing (machining)?
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
Fabrication and Machining Service24h Technical support