ASME SA514/ SA514M Grade E quenched and tempered Alloy steel plates are high yield strength steel of structural quality in thickness of 150mm and under intended primarily for use in welded bridges and other structures. ASME SA514/ SA514M Grade E quenched and tempered alloy steel plates are mainly used to make mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader, etc.
ASME SA514/ SA514M Grade E quenched and tempered alloy steel plate chemical composition:
Grade | C | Mn | P | S | SI | Ni | Cr | Mo | V | Ti | Zr | Cu | B |
SA514 Gr.E | 0.12-0.20 | 0.40-0.70 | ≤0.035 | ≤0.04 | 0.20-0.35 | ~ | 1.40-2.00 | 0.40-0.60 | ~ | 0.04-0.10 | ~ | 0.20-0.40 | 0.0015-0.005 |
ASME SA514/ SA514M Grade E quenched and tempered alloy steel plate mechanical property:
Grade | Thickness Inch |
Yield Strength Mpa |
Tensile Strength Mpa |
Elongation in 50mm | Hardnees Brinell |
SA514 Gr.E | less 3/4 inch | 690 | 760-895 | 18 | 235 |
over 3/4 to 2 1/2 | 690 | 760-895 | 18 | ~ | |
over 2 1/2 to 6 inch | 620 | 690-895 | 16 | ~ |
ASME SA514/ SA514M Grade E quenched and tempered alloy steel plates shall be heat treated by the mill to conform to the tensile and hardness requirements by heating to not less 900 degree for quenching in water or oil, and tempering at not less 620 degree.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!