TA2+Q345R Titanium steel composite plate
Grades:
TA2+Q235B
Standard:
nb/t47002.3-2019
Specification:
(2+10)*2240*5490
Product introduction:
1.Implementation standard: NB/T47002.3-2009
2.Product specification:
Thickness: >3mm, of which the thickness of the compound layer is 1mm～6mm and the thickness of the base layer is >2.5mm
Width: 1500mm～2600 mm Length: ＜12000mm
3、Product varieties:
Commonly used base material: Q235A(B), Q345A(B), 20g, 20R, 16MnR, etc.
Commonly used compound material: TA1,TA2,TA9,TA10
Titanium steel composite plate product performance:
(1) Combination rate: not less than 98%
(2) Mechanical properties
Interface shear strength Jb,Mpa≥ Yield point σs,Mpa Tensile strength σb,Mpa Elongation δ,% Impact toughness Akv,J
210 Not less than the standard value of the base steel plate Not less than the standard value of the base steel plate and not greater than the upper limit value of 35Mpa Not less than the standard value of the base steel plate It should be in accordance with the provisions of the base steel plate
(3) Process performance
Thickness, mm Bending centre diameter d Outside the bend inside the bend, 180o
≤ 20 2a There shall be no delamination, cracks
Note: a for the total thickness of composite steel plate
5、Delivery status: hot rolled, heat treated or polished delivery.
6、Specific application scope: raw coal hopper of power plant, pressure vessel, storage tank, reaction tank, desulphurisation equipment, anti-corrosion pipeline, water tank and so on.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
