SA516Gr70 boiler steel is also known carbon steel plates that used for pressure vessel plates and moderate or lower temperature service. SA516Gr70 steel plates are intended primarily for service in welded pressure vessels where improved notch toughness is important. Apart from this, clients can get the plates from us at industry leading rates.
SA516Gr70 pressure vessel plates specificationWidth 1000mm-4500mm
Thickness 5mm-150mm
Length 3000mm-18000mm
Supply Condition As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement
Impact tested -52° C
Tempering Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F.
Applications Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service.
SA516Gr70 plates available sizes in ready stock
6 x 2000 x 12000 |
8 x 2500 x 12000 |
10 x 2000 x 12000 |
12 x 2000 x 12000 |
12 x 2500 x 12000 |
14 x 2000 x 12000 |
16 x 2000 x 12000 |
16 x 2500 x 12000 |
18 x 2500 x 12000 |
25 x 2500 x 12000 |
25 x 2500 x 9000 |
32 x 2500 x 6000 |
40 x 2500 x 6000 |
40 x 2500 x 7000 |
75 x 2500 x 4100 |
10 x 2500 x 12000 |
10 x 2500 x 6000 |
90 x 2500 x 6800 |
14 x 2000 x 5400 |
14 x 2500 x 12000 |
90 x 1500 x 2700 |
20 x 2500 x 12000 |
22 x 2000 x 11500 |
|
32 x 2500 x 3000 |
36 x 2500 x 6000 |
|
Are you also interested in further steel processing (machining)?
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
Fabrication and Machining Service24h Technical support